Primer Sealer Solveprimer mono 0.75L

SURFACE PREPARATION AND APPLICATION CYCLE

Iron. On SA 2-2.5 sandblasted iron, apply a coat of EPOFOND AM-9, allowing it to dry for 12-24 hours. In the event that it is not possible to blast, it is advisable to mechanically clean the iron: clean the surface and apply a base coat such as EVIOX CROMOMINIO and leave to dry for 24 hours. Apply 1-2 coats of SOLVER PRIMER (with an interval of 24 hours between them) and repaint with finishing enamel.

Ship hulls. For antifouling finishes on boat hulls, apply 2-3 coats of SOLVER PRIMER over a suitable primer (with an interval of 24 hours between each coat) and repaint with 2-3 coats of antifouling.

Dead work of ships. For the topsides of boats and external constructions in general, apply 2 coats of SOLVER PRIMER over a suitable background (with an interval of 24 hours between each one) and repaint with finishing enamel.