The Blue Smart IP22 charger is the new Victron battery charger. This charger has built-in bluetooth with which you can check the status of your battery remotely.
A charger has the function of loading the batteries when these are at a low level of load.
The Blue Smart IP22 charger can be used on devices both in its workshop and in motor vehicles, as well as cars (classic), motorcycles, boats and motorhomes.
This model of an output has a 12V voltage and an intensity of 20 amps.
Features:
- High efficiency.
Victron Blue Smart IP22 chargers have an efficiency of up to 94%, these chargers generate up to four times less heat compared to the standard of the sector.
And once the battery is fully charged, the consumption is reduced to 0.5 watts, between five and ten times less than the norm of the sector.
- 6-stage adaptive load algorithm: check-up-load-absorbing-reconditioning-flotation-storage
The BLUE SMART charger has "adaptive" management of the microprocessor controlled battery. Its "adaptive" function will automatically optimize the loading process based on the use given to the battery.
- Storage mode: Less aging and need for maintenance when the battery is not being used.
The storage mode is activated when the battery has not suffered any download in 24 hours. In storage mode, the flotation voltage is reduced to 2.2 V / cell (13.2 V for 12 V batteries) to reduce the gasy and corrosion of positive plates. Once a week, the tension at the absorption level is uploaded again to "match" the battery. This function avoids stratification of electrolyte and sulfation, the main causes of battery failures.
- Also load Li-ion batteries (lifepo₄)
Lifepo₄ batteries are loaded with a simple initial load algorithm -absorption - flotation.
- Night adjustment (night) and low (bass)
When Night or Low modes are active, the output current is reduced to a maximum of 50% of the nominal output and the charger will be totally silent. Night mode automatically ends past 8 hours. Low mode can be completed manually.
- Protection against overheating
The output current will be reduced as the temperature increases up to 50 ° C, but the Blue Smart charger will not fail.
- Eleven LED State Indicators
Loading algorithm: Test (check) / Bulk (Initial load) / Absorption (Absorption) / Float (Reconditioning) / Float (Floating) / Storage (Storage) / Ready (Ready)
MODE button To adjust: Normal (14.4 V) / High (14.7 V) / Recondition / Li-ion