Victron Inverter Phoenix 3000W 12/3000 230V Ve.bus - PIN123020000

Sinusmax

One of the unique characteristics of Sinusmax technology consists of its very high boot power. Conventional high frequency technology does not offer such an extraordinary performance. The Phoenix investors, however, are well endowed to feed difficult loads, such as refrigerators, compressors, electric motors and similar devices.

Up to 6 units of the inverter can operate in parallel to achieve a higher output power. Six units 24/5000, for example, will provide 24 kW / 30 kVA output power. Its configuration for three-phase operation is also possible.

If an automatic transfer switch is required, we recommend using the Multiplus inverter / charger instead of this. The switch is included is this product and the multiplus charger function can be disabled. Computers and other electronic equipment will continue to operate without interruption, since the Multiplus has a very short switching time (less than 20 milliseconds).

All models have a RS-485 port. All you need to connect to your PC is the MK2 interface (see related products below). This interface is responsible for galvanic isolation between the inverter and the computer, and converts the RS-485 jack into RS-232. A RS-232 conversion cable is also available on USB. Along with the Veconfigure software, which can be downloaded for free from the web www.victronenergy.com, All inverter parameters can be customized. This includes the voltage and the output frequency, the surge or subtension settings and the programming of the relay. This relay can, for example, be used to point out several different alarm conditions, or to start a generator.

Investors can also connect to Venet, the new Victron Energy power control network, or other computer tracking and control systems.

The possibilities offered by high-power inverters connected in parallel are really amazing.